HJL series vertical standard injection machine. 

1, An exquisitely-made screw for pre-plasticization, giving a uniform plasticization, good for molding the precision engineering plastic parts.

2, 3-section temperature control,  step-less adjustment of the quick injection and back pressure.

3, Balanced rising and falling of the forward-backward twin cylinders, allowing a still easier adjustment of the mould and easier cleaning of the material remainder.

4, Fixed lower mould plate, movable upper mould plate, giving a good position of the inlay panels. In addition, there is a finished product ejector.

5, Syphon device, quickened operation and energy-conservation, high productivity

6, Proportional hydraulic loop, fully computerized control,  giving a steady and reliable operation.

7, High speed, low pressure closure of the mould as protective to the mould. photocell-based fully automatic protection for the personnel safety and machinery reliability.